Führungsband - MeterwareGuide band by meterFührungsband - MeterwareFührungsband - Meterware
S.F. Components GmbH

Tape material - by meter - fabric base laminate
KT200T / KT500T / KT500TS / KT700T

Strip-material made of KT200T and KT500T, is being used in the field of the classical hydraulic cylinder production for very big diameters and especially maintenance and repair.

The KT200T basic material consists of pressed, phenolic resin quoted, synthetic fabric plates with PTFE and the KT500T basic material consists of pressed, polyester resin quoted, polyester fabric plates with graphit or PTFE. Diminutive induced pores on the surface take effect as lubricate reservoir. Both materials are appropriate for hardest strains, absolutely maintenance-free and corrosion resistant. Both materials have a very low water absorption. The distinguished physical and mechanical properties of these materials allow the application in agricultural and construction machinery, even under disadvantageous conditions. Strip material can be supplies in spools with a length of about 2700 mm KT200T and in a length of 10.000mm the KT500T.

For KT200T and KT500T we created standard dimension, but we could also deliver individual dimension for customers application.

The KT500T. This material is based on pholyester resin with polyester fabric and includes in standard additive graphite or individuell PTFE . This tape is available in a lenght of 10 meters per spool.

Our KT500T is also available in spiral version in different diameters, we call them KT500TS in a length of 5.000mm!

 

New in our programm the tape KT700T. The KT700T basic material consists of pressed, high temperature phenolic resin quoted, aramid fabric plates with graphite.This material exhibits high load-bearing capacity, high wear resistance and is characterized by very good elastic properties. This material has a very high temperature range, it can be used up to 200°C. The tape will be delivered in a length of 10.000 mm per spool.

Technical specifications KT200T:

Compression strength, static, vertical:

Sliding friction coefficient against steel:

Max. sliding speed:

Working temperature range:

EN ISO 604

DIN 53375

320N/mm²

0,06µ

1 m/s

-40..+130°C

Technical specifications KT500T/KT500TS:

Compression strength, static, vertical:

Sliding friction coefficient against steel:

Max. sliding speed:

Working temperature range:

EN ISO 604

DIN 53375

340N/mm²

0,05µ

0,8 m/s

-40..+130°C

Technical specifications KT700T:

Compression strength static, vertical:

liding friction coefficient against steel:

Max. sliding speed:

Working temperature range:

EN ISO 604

DIN 53375

350N/mm²

0,05µ

0,8 m/s

-40..+200°C

Directives

All information and values stated concerning our product portfolio are based on the knowledge optained through a long experience of manufacturing and application.
These figures are for indicative purposes only and may vary (exceed or deceed) according to the particular circumstances. Unknown factors in the applications and practice can considerably change the conditions and reduce and change statements, which may cause the above information to be invalid.
No liability can be accepted for any mistakes or omissions, error and subject to change without prior notice.

News

The new S.F. Product Catalogue has been released!

Hot of the Press - ask for your personal edition: Info@sf-components.com |  +49 / 8142 / 651 800 Or as download directly here. Individual product categories you find under servi

[подробнее]
Surveillance audit of the management system successfully completed

7 August 2019                             For all certifie

[подробнее]

SERVICE

Strip material - by meter

Fabric-base laminate (fbl)

Download

 

Fabric-base laminate (fbl) Spool

Download

 

Fabric-base laminate (fbl) Spiral

Download

 

PTFE

Download

© Copyright 2019 S.F. Components GmbH. All rights reserved

This website uses cookies

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.