Tape material - by meter - fabric base laminate
KT200T / KT500T / KT500TS / KT700T

Strip-material made of KT200T and KT500T, is being used in the field of the classical hydraulic cylinder production for very big diameters and especially maintenance and repair.

The KT200T basic material consists of pressed, phenolic resin quoted, synthetic fabric plates with PTFE and the KT500T basic material consists of pressed, polyester resin quoted, polyester fabric plates with graphit or PTFE. Diminutive induced pores on the surface take effect as lubricate reservoir. Both materials are appropriate for hardest strains, absolutely maintenance-free and corrosion resistant. Both materials have a very low water absorption. The distinguished physical and mechanical properties of these materials allow the application in agricultural and construction machinery, even under disadvantageous conditions. Strip material can be supplies in spools with a length of about 2700 mm KT200T and in a length of 10.000mm the KT500T.

For KT200T and KT500T we created standard dimension, but we could also deliver individual dimension for customers application.

The KT500T. This material is based on pholyester resin with polyester fabric and includes in standard additive graphite or individuell PTFE . This tape is available in a lenght of 10 meters per spool.

Our KT500T is also available in spiral version in different diameters, we call them KT500TS in a length of 5.000mm!

New in our programm the tape KT700T. The KT700T basic material consists of pressed, high temperature phenolic resin quoted, aramid fabric plates with graphite.This material exhibits high load-bearing capacity, high wear resistance and is characterized by very good elastic properties. This material has a very high temperature range, it can be used up to 200°C. The tape will be delivered in a length of 10.000 mm per spool.